Long knife bayonet with semi spear point and "V" ground edge. Blade has a deep square edged fuller and is parkerized. High narrow upper guard with rounded point on lower guard. Walnut scales are screwed to tang and have 2 grooves in center. Pommel...
Olive drab sand finished steel helmet with wool felt, cotton net, leather and black rubberized canvas liner. Russet leather chin strap with brass loops and pot metal buckle. White tag inside top.
88.7.11 -- Olive drab helmet is made of steel and 11 1/8" x 9" x 8". "D" rings on each side for cotton webbed chin strap attachment. On right side chin strap is 8" long with a 1" buckle. On left side chin strap is about 4 5/8" with hook attachment....
Olive drab cloth mask with layer of rubber on interior. Stitched to mask is black elastic head harness. Inside mask is a black rubber nose piece and yellow mouthpiece which is broken away. Attached to mask at mouth area is black painted metal...
Blade is 17 1/8" long, 1/4" thick, and 1" at hilt. Straight back, tapering to semi-spear point 2" from end. Deep, square edged fuller runs for 12 1/2" beginning 3 3/8" from point. Back slightly round. True edge sharply "V" around for 14 1/2". 4...
Water cooled machine gun, light model MG08/15. Caliber 7.92mm. Waterjacket holds five pints. Crank on right side of receiver. Belt-fed from steel from magazine. Fitted with wood rifle-type buttstock intended for shoulder use. On bottom near rear of...
Chauchat 20-Round magazine, air-cooled light magazine with wood buttstock, pistol grip, forward grip, folding metal spike-type bipod. Both front blade and rear notch sights offset to left. Two sling swivels on left side of receiver, as is fire...
Made in three parts: lid, bowl and handle. The lid is a separate piece and rests on top of the bowl and is secured by the handle. The lid has a loop riveted on the top. The bowl is 1 1/4" deep and has utensil markings on the inside. The hinged...
Caliber .30 magazine, staggered box type in receiver, capacity five cartridges. Grasping grooves in stock, machined trigger guard, serrated trigger. Barrel length is 24".
Caliber .30 - 06 bolt action; five round magazine, post front sight with protecting ears; movable base for fixing lateral position, rear sight of peep-aperture type mounted on bridge of receiver; graduated from 100 to 1600 yards; no windage...
Olive drab metal entrenching tool with wooden shaft and t-handle. The shaft is secured to shovel by two rivets. The handle is secured to shaft with metal band which passes over handle and is riveted twice.
Leather pouch sewn onto stiff leather back. Pouch has gussetted sides sewn to back with leather binding. Shouldered flap is bound in leather with two billet straps sewn on front. Body has leather piping and two brass roller buckles with standing...
Cover made of a single piece of brass metal bent twice to form two sides and a spine. A brass circular collar disk is attached to the face and stamped with the number "63" above two crossed cannon barrels with the letter "C" below.
A cartridge spacer ring carrying interior separators is fastened by a rivet to the magazine pan. Inside the pan itself is the magazine center; while outside is the magazine top plate, enclosing the magazine latch and the magazine latch spring. The...
Green silk ribbon with yellow center stripe hung from brass pin with locking hook. The medal is suspended from a ribbon and decorated with a sword and wreath on the front with an eagle inside of the wreath.
Double rainbow ribbon with two bars: "MEUSE-ARGONNE" and "DEFENSIVE SECTOR". Suspended from ribbon is a medal with a winged figure on obverse and a shield emblem with lists of countries at the sides on reverse. Medal is hung from pin and locking...
Medal is bronze with a diameter of 1 3/8". Obverse shows a female winged figure, symbolizing Victory. In her left hand is a shield, and in her right hand a short sword, pointing down. The wings extend to the edge of the medal and her head is...